obdii.blogg.se - How to install VAS 5054A ODIS 4.0.0 VAG Software on Win 7

How to install VAS 5054A ODIS 4.0.0 on Windows 10, windows 8, windows 7, window xp? Here came out the test report of crack ODIS 4.0.0 system requirement and Bluetooth vas504a with OKI chip vag diagnostic tool compatibility, also with odis 4.0.0 reviews and FAQs, released by Obdii365.com.

ODIS 4.0.0 system requirement report:

VAS 5054A ODIS 4.0.0 Windows 7 32bit………..CONFIRMED!

Odis 4.0.0 Windows 10………………………..need luck!

Odis 4.0.0 Windows 8………………………..need luck!

Odis 4.0.0 Windows 7 64 bit………………..need luck!

Odis 4.0.0 Windows XP………………………..need luck!

ODIS 4.0.0 & VAS 5054A test report:

sp33………………WORKED

sp33-b VAS 5054A ODIS……………WORKED

sp33-bo………….WORKED

sp33-e……………WORKED

sp33-d…………….NOT worked

sp33-c…………….NOT worked

ODIS 4.0.0 download:

Odis 4.0.0 download on Mega

new ODIS-S 4.0.0 ONLY no launcher

ODIS 4.0 + Postsetup +launcher + Keygen+ licence.rar

ODIS 4.0.0 torrent without password

(Recommend!!) download ODIS 4.0.0: tested working 100% : via http://www.obdii365.com/

How to install VAS 5054A ODIS 4.0.0 on Windows 7 32 bit?

Open odis 4.0.0 disk E:

Copy all the files (odis 4.0.0.part1-odis 4.0.0.part17)

Paste them in on a new folder established in local disk D:

Extract the rar file

Open Computer/D:/odis4.0/ODIS 4.0.0

Open OffboardDiagSetup-Service application

Select language

Click on OK

Next to begin installation of Offboard Diagnostic Information System Service 4.0.0

…

License file selection- search: license.dat

Installing odis…

Trust the software and install

Finish ODIS 4.0.0 installation

No need restart the computer now

Open Computer/D:/odis4.0/ODIS 4.0.0/regedit ODIS 4.0.0/Volkswagen

Copy OffboardDiagLauncher application

Open Offboard Diagnostic Information System Properties on Desktop

Open file location: C:/Program files/Offboard_Diagnostic_Information_System_Service

Paste, copy and replace the existed file

Open Computer/D:/odis4.0/ODIS 4.0.0/Windows6.1-KN3033929-x86

Click on Yes to install Windows software update (KB3033929)

Installing…

Installation complete

Restart now!

Run Offboard Diagnostic Information System on Desktop

Run ODIS as administrator

Open Computer/D:/odis4.0/ODIS 4.0.0/regedit ODIS 4.0.0/Volkswagen

Run KEY application

Copy the Hardware ID in odis to generate the registration key

Then copy the the registration key to odis to register

In Offboard Diagnostic Information System Postsetup

Select local directory: disk D:/odis4.0/ODIS 4.0.0/postsetup

Enter user name: abc, keyword: abc

Select the Postsetup language:: Here: English (US)

Continue

Postsetup update result

Continue

Downloading files…

Then go to diagnosis

Read the Warnings/notes, then OK

Then end ODIS

Prompt: installing device driver software

Prompt: vas5054 device driver software installed successfully

Go to computer management

Select device manager->softing vehicle interface->vas5054

Again, open Offboard Diagnostic Information System on Desktop

Cancel to open a file

Release notes: OK

Read the Warnings/notes, then OK

Click on Starting diagnosis

Check ignition ON, continue

Select a vehicle: volkswagen 3c passat 2007 (7) sedan engine: bsf 1.6l simos/75kw

Vas 5054a odis 4.0.0 read fault codes of 3c passat 2007 (7)

Continue

Done!

This is the how-to’s of vas 5054 odis 4.0.0 customer installation:

If you want to use only one brand:
1. Install OffboardDiagSetup-Service_VWMCD_4_0_0-B40_5_0_1
2. When asking for licence, use licence provided in 1st post (Audi, VW or SK). The licence you use will determine what car brand your ODIS will cover.
3. After install, reboot
4. Replace ODIS launcher with the one provided
5. Run the launcher, copy the hardware ID. close it.
6. run the keygen, create your key from the Hardware ID, (I personnaly ticked “Executions” and input “1000” so I can run it 1000 times before the licence expires.
7. Run ODIS launcher AS ADMINISTATOR, paste your key.
8. ODIS will launch and ask for post setup.
9. UNZIP post setup archive and point ODIS to your UNZIP folder.
10. Enjoy.

If you want to use multiple brands:
1. Install OffboardDiagSetup-Service_VWMCD_4_0_0-B40_5_0_1
2. When asking for licence, use licence provided in 1st post (Audi, VW or SK). The licence you use will determine what car brand your ODIS will cover.
3. After install, reboot
4. Replace ODIS launcher with the one provided
5. Run the launcher, copy the hardware ID. close it.
6. run the keygen, create your key from the Hardware ID, (I personnaly ticked “Executions” and input “1000” so I can run it 1000 times before the licence expires.
7. Run ODIS launcher AS ADMINISTATOR, paste your key.
8. ODIS will launch and ask for post setup… close the program.
9. Rename ODIS installation folder (example ….. AU or ….. VW)
10. Change your desktop shortcut
11. Run ODIS as ADMINISTRATOR,
12. UNZIP post setup archive and point ODIS to your UNZIP folder.
13. Repeat for each brand
14. Enjoy.

ODIS 4.0.0 officially released notes:

This release contains new features and bug fixes.
New functions
 Support for Windows 10 operating system
 Performance optimization in the diagnostic entry
 Detection of the VAS 6154 via subnets
 Support for non-converging measurements in the GFF
 Integration of the brand Bugatti
Bugfixes
 Deviation in the EcuCom job for “ECU coding” KWP2000
 ODIS installation error message – Could not call proc – Actia PDU API
 Flashing with large data container, flash session is not started
 Fuel system can not be vented // Level not readable
 Flash abort ERROR PROGRAMMING at Audi A1 Bremse (TPI 2033217/3)
 ODIS crashed when switching from USB to Bluetooth
 Bluetooth connection type: No new connection was established after the diagnostic test was again within range of the VAS5054A.
 Crash at application start
 Update to 3.0.2 fails with ODS4010E: UpdateProcess failed with 11
 Query error memory hangs: “Read control units (33%)”
 Connection setup when changing from Bluetooth to USB takes too long

 Authentication problem in WLAN infrastructure mode with RADIUS server
 VAS 6154 is searched for on the wrong interface after completion of the diagnostic session
 ODIS service SingleBuild installation, setup message “Runtime Error” for recovered testers
 DA_14 in the AU48X DSD not possible
 VCI 5054 Connection termination for Windows user change
 ODIS Interface texts: German texts have been deleted from the XML files (vaudas.texts)
 ODIS Service does not display the version of the diagnostic data for MAN in the correct format.
 Calibration instruction must be adjusted
 Buttons are displayed partially in the wrong language (German instead of English).
 The symbol of the status icon changes with the ODIS close
 Buttons to start the JRC and choose your own exam is missing
 The date in disclaimer with EN-US language is not displayed correctly
 In the installation dialog, the language en_US is displayed twice
 Speech caseback leads to corrupt feedback file (invalides XML)
 Vehicle project VW VIN can not be opened // ODS8003E Execution in system state PROJECT_OPENED not possible.
 VCI-Number on DISS-protocol
Vehicle restrictions
 For brand AUDI, the Flash mode is supported.
 For brand Volkswagen PKW, the Flash mode is only partly supported. The usage is only allowed if described in TPI.
 For all other brands, Flash mode is restricted.
Supported Vehicles
All supported vehicles are listed below.
Supported AUDI-Models
 All AUDI-Models are supported.
Supported Volkswagen-Models
 All Volkswagen-Models are supported.
Supported Volkswagen Nutzfahrzeuge-Models
 All Volkswagen Nutzfahrzeuge-Models are supported.
 Only immobilizer components in LT2 vehicles can be diagnosed.
Supported Seat-Models
 All Seat-Models are supported.
Supported Skoda-Models
 All Skoda-Models are supported.
Supported Bentley-Models
 All Bentley-Models are supported.
Supported Lamborghini-

ODIS 4.0.0 reviews from vas5054a users:

– for me i got it working vw and audi ,just used 2 difrent pc’s but i got it working by running launcher in xp service pack3 compatibilty mode and as administrator this is on my Win7 64bit.
did not test it yet but audi and vw is running will see later if it actualy works but so far so good

– I can make online programming

– All online functions needs a valid subscription

– Do not use the idiotic Windows 8 or 10 and install under Windows 7 64bit

– Running on win7 as admin.

–Win 7 need to use.

– I have ODIS-S 4.0.0 and ODIS-E 6.7.5 all marks in one license

Vas 5054a odis 4.0.0 FAQ:

Here are frequently asked and questions of odis 4.0.0.

– Anyone knows if the post setup are different for USA and euro market ?

– The PS is different for Eu vs. Usa since Odis v3.x.x

– I tried several times to include multiple brands. It looks as licensing is the problem and post-setup update is not picking up brands other than the one that is licensed.

– To fix the license issue you need to go into the installation directory and open license location with notepad++ and make the change like you did to the installation directory for e.g. (…… AU or ……. VW)

or just use X-COPY and make a single starter file with choices.